Ididit Steering Wheel Adaptor: 3-Bolt Bell Adaptor Manuel d'utilisateur télécharger pdf

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI PH: 517-424-0577 FAX: 517-424-7293

www.ididitinc.com

Installation of a Bell Adaptor & Wheel

For Part Number’s 2209300020, 2209300030, 2209300040, 2209300051

Instruction #: 8000010004 REV 03/14

Due to the design of the steering wheels, you will

rst want to check the line of sight through the

wheel. We recommend a “Y” for the three spoke

and an “X” for the four spoke. This should assist

you in seeing your gauges.

1. Align the wheel to the adaptor using the half-inch

hole as a reference. This hole will need to be some

where between 10 o‘clock and 12 o’clock when

the wheel is straight. Most 3-bolt wheels will use

hole (A.). If it is a newer Grant wheel, you may

need to use hole (B.) Use 1/4”-28 bolts to secure

the wheel to the adaptor. (See Figure 2)

2. Flip the wheel over and drill a half-inch hole

through the wheel using the adaptor as a guide.

(See Figure 3)

3. Disassemble the wheel and remove any/all burrs or

sharp edges from the wheel.

Now we are ready to install this assembly on a

steering column.

1. Check to verify that the driving wheels are

straight. On top of the steering column there is a

tube sticking up. This tube should be rotated to the

10 - 12 o’clock position when the driving wheels

are straight. Set the adaptor onto the shaft of the

column, this may require you to rotate the shaft a

little to the closest tooth on the spline of the column

until the adaptor sets into position. (See Figure 4)

2. Set the steering wheel on the front of the adaptor

and onto the shaft. Rotate the wheel so that it

matches the hole you drilled and install the three

bolts loosely. Install the nut (9/16-18 Jam nut) on

the center shaft. Torque to 35 ft. lbs.

REV 03/14 1

Résumé du contenu

Page 1 - REV 03/14

PROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incididit inc. 610 S

Commentaires sur ces manuels

Pas de commentaire

Ididit Steering Wheel Adaptor: 3-Bolt Bell Adaptor Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Ididit Steering Wheel Adaptor: 3-Bolt Bell Adaptor. ididit Steering Wheel Adaptor: 3-Bolt Bell Adaptor User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Ididit Steering Wheel Adaptor: 3-Bolt Bell Adaptor