Ididit Steering Wheel Adaptor: 1953-66 Corvette Adaptor Manuel d'utilisateur télécharger pdf

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI PH: 517-424-0577 FAX: 517-424-7293

www.ididitinc.com

1953-62 Corvette Adaptor Instructions

For Part Number’s 2202360020, 2202360030, 2202360040, 2202360051

Instruction #: 8000010016 REV 03/14

Prior to installing this wheel adaptor verify that your

road wheels are pointing straight ahead.

Adaptor Preparation:

1. Removethe(6)10-32x3/4”wheeladaptorathead

screws (Figure 1A)

Remove (3) 8-32 x 1/2” socket cap screws (Figure 1B)

Disconnect Battery

Installation:

1. Remove the nut from the top shaft of your steering

column.

Rotate the Horn Cam on the steering column so that the

male tube is aligned to the 10:30 position. (Figure 2)

3. Next, install the wheel adaptor. Align the 1/2” hole

on the adaptor to the male end of the Horn Cam. Now

push the adaptor onto the splined end of the steering

column. If the splines of the column and the adaptor

do not line up, simply wiggle or move the shaft just

enough so that the adaptor slides onto the splines.

4. Install the adaptor nut back onto the top shaft of the

column and torque to 35 ft. lbs. (Figure 3)

5. Next, line up the steering wheel as shown in Figure

7andinstallthe(6)10-32x3/4”atheadscrewsto

secure the steering wheel to the adaptor.

6. Install the horn wire by it pushing down into the horn

tube and gently turning it an 1/8 turn to the right Note:

The Horn Cam has a cutout and the black sleeve on

the horn wire has a nub on it. Line up the nub with

cutout and push down to compress the spring. Once

compressed, turn the black sleeve of the Horn Cam

1/8 of an inch clockwise. (Figure 4)

7. Line up the three “ears” of the new Horn Contact and

using a 9/64” Allen wrench install the (3) 8-32 x 1/2”

socket cap screws until they are tight. (Figure 5)

8. Lastly, install the horn button with the dimples

matching the dimples from the new horn contact

plate. Press rmly until the horn button is secure.

(Figure 6)

Your installation is now complete!

REV 03/14 1

Résumé du contenu

Page 1 - REV 03/14

PROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incididit inc. 610 S

Commentaires sur ces manuels

Pas de commentaire

Ididit Steering Wheel Adaptor: 1953-66 Corvette Adaptor Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Ididit Steering Wheel Adaptor: 1953-66 Corvette Adaptor. ididit Steering Wheel Adaptor: 1953-66 Corvette Adaptor User Manual [de] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Ididit Steering Wheel Adaptor: 1953-66 Corvette Adaptor