Ididit Gear Shift Lever Replacement Manuel d'utilisateur télécharger pdf

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

PROPERTY OF

ididiT, inc

ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI PH: 517-424-0577 FAX: 517-424-7293

www.ididitinc.com

Gear Shift Lever Replacement for ididit Column Shift Columns

For Part Number’s 2504300020, 2504300120, 2504300220, 2504300320

Instruction #: 8000010081 REV 04/12

Tools necessary for the job:

• Hammer

• Flat ended punch 3/16” diameter

• Pliers

• Flat Head Screwdriver

Kit Includes:

• Shift Lever

• Shift Pin (example to right A)

• Bushing (example to right B)

1. The shift pin holding the shift lever must be removed.

To do this lightly tap the shift pin from the bottom of

the column shift hub. Do not completely remove yet,

just loosen the shift pin enough that it comes up about

a ¼”. (Figure 1)

2. Once the shift pin is up and high enough, use pliers or

lightly tap the shift pin and pull the shift pin up another

¼”, but not enough to pull the pin completely out of its

socket. We want a little tension still on the shift lever

because of the spring that is inside. (Figure 2)

3. Next slide a at head screw driver behind the old shift

lever and onto the shift lever tension spring. This will

act similar to a shoehorn. (Figure 2 A)

4. With the at head screwdriver putting a tension on the

spring, pull the shift pin out of its location. (Figure 3)

5. Gently pull the column shift lever out of its location

while keeping tension on the spring.

6. Once the shift arm has been completely removed,

slowly pull the screwdriver out and release the tension

from the spring. Verify that the spring has not moved

from its canal location. (Figure 4 A)

7. Next slide your new shift lever into position. Install

the lever at an angle with the plastic ange facing the

bottom. (Figure 5)

8. Line up the hole for the shift pin to be reinstalled, you

may need to push back, forth or pull out to line these

holes up.

9. Install the shift pin from the top of the shift hub and

push in. Now with your punch and hammer, gently

tap the shift pin back into its original location until it is

ush. (Figure 6 & 7)

Your installation of the new shift lever is complete!

REV 04/12 1

Résumé du contenu

Page 1 - REV 04/12

PROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incPROPERTY OFididiT, incididit inc. 610 S

Commentaires sur ces manuels

Pas de commentaire

Ididit Gear Shift Lever Replacement Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Ididit Gear Shift Lever Replacement. ididit Gear Shift Lever Replacement User Manual [de] [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Ididit Gear Shift Lever Replacement